Answers and Solutions

Answer

Answer

multiplexer select binary information from one of many input lines and direct it to a single output line .it is also called data selector or many to one circuit

Answer

Answer

In electronics, a multiplexer is a device that selects one of several analog or digital input signals and forwards (channels) the selected input into a single line. It is also known as mux.

Answer

it is a combinational circuit with many inputs and one output . at a time only one input is connected to the output using selection lines .

Answer

In electronics,a multiplexer isa device that selects one of several analog or digital inputs and forwards the selected input towards output based on select lines

Answer

Multiplexer is a device that takes one of the several input signals throgh different input channels and transmits it throgh a single output channel.It has 2^n input lines , n select lines and 1 output line. The logical value at select lines determines which of the input signal will be transmitted to output

Answer

Many to one or many to many or one to many output generating circuit is a multiplexer

Answer

A multiplexer is a circuit which has mulitiple input but gives  single output depending on the select lines.

Answer

multiplexer is called Mux.its a device what takes signals throgh different input channelsand trsmit into a single output channel.

Answer

Multiplexer or Mux is a device that takes one of the several input signals throgh different input channels and transmits it throgh a single output channel. A digital multiplexer has 2^n input lines , n select lines and 1 outputline. The logical value at select lines determines which of the input signal will be transmitted to output.  Practically a Mux is used to transmit  multiple signals that comes from different channels at different point in time over a single channel to save cost. At receiving end demultiplexer commonly known as demux is used to send the received signal over one channel to appropriate channel based on differnt instant of time.

Answer

Answer

Multiplexer is an electronic circuit which takes multiple input and from the given multiple input one of them is selected using select lines and given as a output

​

Answer

Multiplexer is an electronic component through which we can pass 2^N numbers of signals seperately with the help of N no. of selection lines.

suppose you have 8:1 multilexer so the no. of selecttion line will be 3 (2^3).

s0s1s2

000 (I1)

001 (I2)

010 (I3)

011 (I4)

100 (I5)

101 (I6)

110 (I7)

111 (I8)

Where sN is selection lines and IN is inputs

Answer

Multiplexer works as a electronic switch , if we transmitting a number of messages through common channel then this control switch will selected according to their mesages and that particulr message is transmitted only. In digital if we have N input message then we have to take log2(N) select input or control signal line. 

Answer

Answer

Answer

Answer

Multiplexer is a combinational logic circuit which is used to select and route any one of the several input signals to a signal output. An simple example of an non electronic circuit of a multiplexer is a single pole multiposition switch.

Answer

Multiplexer is a combinational logic circuit.

Multiplexer (MUX) is a device which selects one of many inputs to a single output.

The selection is done by using an input address.

Answer

Multiplexing (or muxing) is a way of sending multiple signals or streams of information over a communications link at the same time in the form of a single, complex signal; the receiver recovers the separate signals, a process called demultiplexing (or demuxing). The device which perfroms multiplexing is called as Multiplexer and the device which performs demultiplexing is known as Demultiplexer. 

Answer

Multiplexer is a combinational digital circuit which takes more than 1 as inputs and selects any 1 of them as output. If there are n select lines, then multiplexer can have 2^n no of inputs and only 1 no of output. So a multiplexer or mux is also termed as Data Selector.

Answer

Answer

Technial definaetion you can always find online. I will try to explain it by giving you an intutive explanation.

Imagine you are the boss and on your single telephone (y) you have 8 diffrent lines connecting (since you are running big company you need so many lines). Now obviously your personal secratory will manage all the lines, i mean she will choose which line she should connect to you and which line should be kept on hold. So now imagine it this way, you are the output (single phone), secretary(A,B,C) is the selector, and 8 lines are input (look at the image in link given below).

Now this way you have 8 lines but you use only 1 phone on your end because obviously you can talk to only one person at a time. Thats the beauty of multiplexer.

Now imagine 3 people want to speak to you, scratory will select only one line and keep other on hold while let you speak to only one person, when you are done with one she will select the second person and so on.

http://www.ni.com/cms/images/devzone/tut/image5520841929384613378.png

Answer

selector of one out of multiple signals...

Answer

multiplexer is a combinational logic circuit ,the output depends on present input no feedback,it also called as many to one  .

Answer

Answer

Multiplexer means many into one. A multiplexer is a circuit used to select and route any one of the several input signals to a signal output. An simple example of an non electronic circuit of a multiplexer is a single pole multiposition switch.

Answer

Answer

A multiplexer (MUX) is a device allowing one or more low-speed analog or digital input signals to be selected, combined and transmitted at a higher speed on a single shared medium or within a single shared device. Thus, several signals may share a single device or transmission conductor such as a copper wire or fiber optic cable. A MUX functions as a multiple-input, single-output switch.

Answer

Muliplexer or simply known as mux is a device which selects a single output from several input signals, which can either be digital or analog. it is also known as data selector. Multiplexers are mainly used to increase the amount of data that can be sent over the network within a certain amount of time and bandwidth.

Answer

Answer

At the transmitting end, a nX1 Multiplexer combines n no of communication signals(channels) into a single communication signal (channel) by dividing a real time communication channel into n no of equal time slots with respect to time,and inserts smples of n no of signals (sampled at same nyquist rate) into those timeslots in round robbin fashion.so that a single communication channel can be efficiently used. Each  signal can be de-multiplexed at the receiving end in the similar way.

Answer

It is a device or a circuit that connects an incoming channel (when there are a number of incoming channels available) to an and only outgoing channel . The circuit is performing an action called "multiplex" here. So multiplexers (MUX) have types like 4X1, 16X1...

Answer

Multiplexer is a circuit that combines many inputs to form a single output, selecting one input at a time.

Answer

the term ' multiplex ' means many into one. Multiplexing is the process of transmitting a large number of information over a single line. A digital multiplexer (MUX) is a combinational circuit that selects one digital information from several sources and transmits the selected informatrion on a single output line. a multiplexer is also called a data selector since it selects one of many inputs and steers the information to the output.

Answer

A Multiplexer is a Combinational Digital device.Which consists of several number of AND gate and only one OR gate,which bypasses many inputs into a single output

Answer

A multiplexer is a device which selects one input from several analog or digital signals and forward it into a single line.

Answer

In electronics ,Multiplexer (MUX), is a device that selects one of several analog or digital input signals and forwars the selected input into single line.

Answer

It allows one or more low speedAnalog or Digital signals to be selected. It is combined and transformed at a high speed on a single shared medium.

Answer

Answer

An IC chip called a multiplexer, or a 1-of-16 data selector. It may be considered a selectable commutator; quite simply, it is similar to a single-pole, 16-position switch. The particular input (of up to 16) that is permitted to pass is determined by the binary number inserted through ports.

The demultiplexer, or 1-of-16 data distributor, is a similar but with reversed action. It accepts a digital signal through its one input and then routes it to the particular output selected by the binary value at the control ports.

Answer

A multiplexer allows one or more low speed analog or digital signals to be selected, combined and transformed at a high speed on a single shared medium.

Answer

 multiplexer is a device that selects one of several analog or digital input signals and forwards the selected input into a single line.

Answer

Answer

A multiplexer, abbreviated mux, is a device that has multiple inputs and one output. it has 2^n inputs where n is the number of select lines.depending upon the combination of select line the output gets changed

Answer

A multiplexer is a device that selects one of several analog or digital input signals and forwards the selected input into a single line. Multiplexers are mainly used to increase the amount of data that can be sent over the network within a certain amount of time and bandwidth. A multiplexer is also called a data selector

Answer

The multiplexer, shortened to “MUX” or “MPX”, is a combinational logic circuit designed to switch one of several input lines through to a single common output line by the application of a control signal.

A multiplexer of (2^n) inputs has 'n' select lines, which are used to select which input line to send to the output.

Answer

A Multiplexer is a device that allows one of several analog or digital input signals which are to be selected and transmits the input that is selected into a single medium.

Answer

Answer

Multiplexer is a combinational digital circuit which selects one input as an output from 2^n input lines by using n selection lines. 

Answer

Answer

A multiplexer is combinationol logical circuit,commonly called as MUX,it takes one of the line as input from the avilable (n lines) and gives the output to a valid single line, if the total available lines are 2^n,and n select lines,which are used to select which input line is sended to output.

Answer

Multiplexer is logic circuit, whoch gives many inputs and gives you one output

Answer

Answer

Multiplexer is a combinational digital circuit which selects one input as an output from 2^n input lines by using n selection lines. 

Answer

Answer

A Multiplexer (or Mux)is a device that selects one of several analog or digital input signals and forwards the selected input to a single line.

A Multiplexer with 2^n(2 to the power n)has 'n' select lines which are used to select that which input line is to be selected to send it to the output..

Answer

Answer

Multiplexer or MUX is a device which take analog or digital inputs and transfer into single line.If there is 8 Input lines (2^3) then 3 is selector lines which are used to select the input which will be send to output.MUX is generally used to send more data in a time with same time and bandwidth.IN simple language MUX is used to take more inputs rather than taking 1 input at a time.

Answer

It is a device with several input & Single output 

Answer

A multiplexer or MUX is a device which is used to select a particular analog input and forwards to output. A MUX has 2^n inputs where "n" is the number of selection lines.

Answer

Multiplexer commonlly known as MUX. A Multiplexer is a device that allows one of several analog or digital input signals which are to be selected and transmits the input that is selected into a single medium.  Multiplexer is also known as Data Selector. A multiplexer of 2n inputs has n select lines that will be used to select input line to send to the output.

Answer

Answer

Answer

• Multipexer is a device which selects one output from many inputs.
• it works as parallel to serial converter (switch).
• It has one output terminal, 2^n input terminalsa and n selection lines.
• selection lines are used to identify which input is selected as ouput.

if a,b, are input lines and s is selection line and y is output line then       

  y= a.s' + b.s. means

if s=0 y is a                      if s=1 y is b.

Practical example- if you have 4 types of input devices such as  laptop devices(D0), mobile phone(D1) , PC (D3) and mp3 player(D4) is connected to one output devices i.e speaker(Y). to select whose input is going to output is selected by selection line(S0,S1).

IF SO S1=00 THEN INPUT LAPTOP DEVICE IS CONNECTED TO OUTPUT DEVICE SPEAKER Y=D0

IF SO S1=01 THEN INPUT MOBILE IS CONNECTED TO OUTPUT DEVICE SPEAKER Y=D1.

IF SO S1=10 THEN INPUT PC IS CONNECTED TO OUTPUT DEVICE SPEAKER. Y=D2.

IF SO S1=11 THEN INPUT MP3 IS CONNECTED TO OUTPUT DEVICE SPEAKER. Y=D3.

Answer

It is a device that selects one of several analog or digital input signals and forwards the selected input into a single line. It is also known as MUX.

Answer

Multiplexer commonlly known as MUX

MUX is a combinational logic circuit which used in design electronics circuit. (DIgital electroncis)

One most important features of MUX is having several inputs and provide only one output.

Answer

A multiplexer is a circuit with many inputs but only one output.

Answer

A Multiplexer is a device that allows one of several analog or digital input signals which are to be selected and transmits the input that is selected into a single medium.  Multiplexer is also known as Data Selector. A multiplexer of 2n inputs has n select lines that will be used to select input line to send to the output. Multiplexer is abbreviated as Mux. MUX sends digital or analog signals at higher speed on a single line in one shared device. It recovers the separate signals at the receiving end.  The Multiplexer boosts or amplifies the information that later transferred over network within a particular bandwidth and time.This article gives an overview of what is multiplexer and types of multiplexer.

Answer

A multiplexer(MUX) is a digital circuit which has many inputs and only one output

Answer

A multiplexer is a logical circuit which has many inputs and only one output. It has control lines , to select always one of the inputs  and this goes to the output. 

Application:When you want to send only one signal from many using the control lines, MUX is used

One of the most commonly used in digital design.

Answer

Answer

In  Electronics Multiplexer (MUX) is a device that ie many to one ..ex if 2:1 MUX means 2 input signal and one output signal..A MUX of 2n input has n no. of select line.  

Answer

Answer

Answer

A Multiplexer or simply a MUX is a type of logic element which enables multiple signals to use a shared line ( the output)  The select input S determines which of I0 or I1 gets to be connected to the output signal O The logic is simple: O = ~S.I0 + S.I1 ~ is a not gate . is and gate + is or gate This is a two input MUX which can be used to further build muxes with higher number of inputs. Muxes are very common circuit elements and many times, are more useful for deriving output for complex logic equations of the inputs. They are particularly useful for Busses (collection of signals for communication between circuit blocks) which have multiple Masters ( blocks which can initiate traffic on the bus) where the select signals can be used to grant a particular Master access to the bus. Thus, a mux can be effectively used to connect various circuit sub-blocks using the shared signals based on the value of the select signals, which are usually controlled by the state of the design. Also this circuit element is extensively used for configuration. For example, clock MUX, often have two different frequency clock at their inputs and based on the circuit configuration, a MUX can be used to either allow a higher or lower frequency clock.

Answer

iT IS ADEVICE THAT SELECTS ONE OF SEVERALA ANLOG OR DIGITAL INPUTS SIGNAL AND FORWARD THEM INTO A SINGLE  LINE.

Answer

A multiplexer is a combinational digital logic switching device that has multiple inputs and one output. In addition to the input and output lines, the multiplexer has data select lines through which the data passed from an input line to the output line 

Answer

Multiplexer is a selector. Several signals(anlaog or digital) are given at input. The output will be the selected signal among the input. Multiplexer is also called as MUX. MUX will have 2^n inputs and n select lines which selects the input and sends it to output.

Answer

Multiplexer is a device that selects one or several analog and digital signal and forward selected input into a single line.It is known as data selector.

Answer

Answer

Answer

Multipler is also called data selector.It is a device that selects one of several analog or digital input signals and forwards the selected input into the single line.For suppose a multiplexer of 2^ninputs has n select lines which are used to select input line to send the data to output.

Answer

Answer

The Multiplexer acts as a multiple-input and single-output switch. Multiple signals share one device or transmission conductor such as a copper wire or fiber optic cable.In telecommunications, the analog or digital signals transmitted on several communication channels by a multiplex method. These signals are single-output higher-speed signals. A 4-to-1 multiplexer contains four input signals and 2-to-1 multiplexer has two input signals and one output signal.

Answer

Answer

a multiplexer (or mux) is a device that selects one of several analog or digital input signals and forwards the selected input into a single line. A multiplexer of 2n inputs has n select lines, which are used to select which input line to send to the output.

Answer

A Multiplexer is a device that selects one of several input signals and forwards the selected input into a single line. A multiplexer of 2^n inputs has n select lines, which are used to select which input line to send to the output. A multiplexer is also called a data selector.

Answer

Multiplexer is an electronic device which selects one of the many inputs and delivers single output. For Example a 4 X 1 Mux will have 4 input lines and 1 output line, hence it can select from 4 different inputs to give an output

Answer

Answer

The Multiplexer acts as a multiple-input and single-output switch. Multiplexer is also known as Data Selector. For example A 4-to-1 multiplexer contains four input signals and one output signal.

Answer

In electronics a multiplexer is a device that selects one of several input signals and forwards the selected input signals into a single line. It is known for multiple input & one output.also used for multiplexing.