Keshav Jindal: Nurturing Minds through Tutoring

Answer

P.S. Gill is a very  good  book.

Usually in many engineering colleges it is used and has a lot of examples.

K.L. Narayana is also good one

Answer

Visit you tube channel how stuff works and learn engineering to know about automobiles.

Engineering level all explained very well

Answer

Given : Tower Height = 80m

             Angleof depression = 30degree ( Now this means depression is there i.e. angle btwn horizontal and hypotenuse)

Angle inside triangle = 60

             e need to find base length / Distannce.

Sol. :  Angle of base will be  (180 - 60-90 )    as sum of all angles is 180.

          Now thuus, Perpendicular is 80

                              Angle of base =  30 degree

                            Base ? i.e.

using tan60 = Perpendicular/Base = 80/x = tan 60= 1/sqrt 3

                   Thhus x= 80*sqrt3= 80*1.73 = 138.4m 

Answer

Depends upon your skills.

If you have good aptitude then 2 months is enough which will include everything, If  you find yourself weak in your mathematics, english then may be 5-6 months,

It is preffered that solve as many sample papers as possible. The main thing that matters is the time management.

Answer

Like the basic pages on social networking like FB.

Best automobile knowlde is gained by youtube, So do subscribe some latest technologies channel.

Get updated with magazines like TOP Gear etc. This will help you.

The other info is for F1 racing. Start following it.

If you have interest you will automatically be ready for this and get you better results.

Answer

The main component parts of a clutch are: – driven plate, sometimes referred to as the clutch, centre or friction plate; – pressure plate which comes complete with the clutch cover, springs or diaphragm to provide the force to press the surfaces together; – release bearing which provides the bearing surface which, when the driver operates the clutch pedal, disconnects the drive between the engine and the gearbox; – flywheel, the main driving member of the clutch.

Answer

It is a method in which there are very small hole sinside the crancase and through these hole sthe heat induced during the engineoperation can dissipate.

Thus this ventilation is achieved through the minutes pores that are created while designing of automobile cylinder head