I have 1 year and 6 months teaching experience as a lecturer/ A.P. from Mahant Ram Institute of Engineering and Management. I have also specialization [M.Tech] in Production Engineering . I have been associated to COSMO FERRITES L... More [+]
I have 1 year and 6 months teaching experience as a lecturer/ A.P. from Mahant Ram Institute of Engineering and Management. I have also specialization [M.Tech] in Production Engineering . I have been associated to COSMO FERRITES Ltd. for 6 months as a trainee. I am teaching students for more than 2 years.
Home Tuition Only
My approach varies depending on the student's needs and learning style. However my teaching philosophy is based on encouraging students to think for themselves, using real-world examples wherever possible. My aim as a tutor is to create in my students a deep understanding and confidence in answering exam questions and being able to tackle new and unfamiliar problems. My philosophy is based on the idea that learning happens in an environment of mutual respect in which the student is encouraged to think and make new connections for themselves.
An IC chip called a multiplexer, or a 1-of-16 data selector. It may be considered a selectable commutator; quite simply, it is similar to a single-pole, 16-position switch. The particular input (of up to 16) that is permitted to pass is determined by the binary number inserted through ports.
The demultiplexer, or 1-of-16 data distributor, is a similar but with reversed action. It accepts a digital signal through its one input and then routes it to the particular output selected by the binary value at the control ports.
A hydraulic accumulator is a device that stores the potential energy of an incompressible fluid held under pressure by an external source against some dynamic force. This dynamic force can come from different sources. The stored potential energy in the accumulator is a quick secondary source of fluid power capable of doing useful work.
There are three basic types of accumulators:
1.Weight-loaded or gravity accumulator (Simple hydraulic accumulator)
By using air vessel, work is saved by eliminating the work lost in friction during the acceleration and deceleration of the fluid. This (work saved) can be calculated by finding the work done against friction without air vessel and with air vessel.
unit quantities are used in comparison of the performances of turbines of different output, speeds and different heads, it is convenient to determine the output, the speed and the discharge, when the head on the turbine is reduced to unity, i.e. 1 m. The conditions of the turbine under unit head are such that the efficiency of the turbine remains unaffected. Thus the velocity triangles under working conditions and under unit head are geometrically similar.
comparison of the performances of turbines of different output, speeds and different heads, it is convenient to determine Most vital component of Pelton wheel is its bucket. Buckets are casted as single solid piece, in order to avoid fatigue failure. You can note that force acting on the turbine bucket is not constant with time. If you follow one particular bucket, it will have high force for a small time duration (at the time of jet impingement) after that a larger idle period where no jet interaction takes place. So the force acting on the bucket is also not constant. It varies with the time but it is having a cyclic nature. If bucket were made using pieces by welding attachment such cyclic fore will easily lead to premature fatigue failure.
Water jet is split into 2 equal components with help of a splitter. The special shape of bucket makes the jet turn almost 180 degree. This produces an impulsive force on bucket. Force so produced can easily be derived from Newton’s 2nd law of motion. Blade outlet angle close to 180 degree is usually used in order to maximize impulsive force.
A cut is provided on bottom portion of buckets. This makes sure that water jet will not get interfered by other incoming buckets.
If you are doing Regular/full-time M.tech course then you can select various advanced short term course such as NDT, DESIGNING & MODELING, STATISTICAL ANALYSIS. courses depend on the branch in which you are doing M.tech.
When a liquid metal solidifies by cooling, the atoms arrange themselves in regular space lattices, forming a crystal. A space lattice is an array of points showing how particles (atoms, ions or molecules) are arranged at different sites in three dimensional spaces.