Posted by: Panseng on 01.06.2022
Ask a QuestionRandom Access Memory (RAM) is used to store the programs and data being used by the CPU in real-time. The data on the random access memory can be read, written, and erased any number of times. RAM is a hardware element where the data being currently used is stored. It is a volatile memory. Types of RAM:
Read Only Memory (ROM) is a type of memory where the data has been prerecorded. Data stored in ROM is retained even after the computer is turned off ie, non-volatile. Types of ROM:
Difference between RAM and ROM:
RAM, which stands for random access memory, and ROM, which stands for read-only memory, are both present in the computer.
RAM is volatile memory that temporarily stores the files you are working on. ROM is non-volatile memory that permanently stores instructions for your computer.
RAM (Random Access Memory):
RAM is volatile memory, which means that the information temporarily stored in the module is erased when you restart or shut down your computer. Because the information is stored electrically on transistors, when there is no electric current, the data disappears. Each time you request a file or information, it is retrieved either from the computer's storage disk or the internet. The data is stored in RAM, so each time you switch from one program or page to another, the information is instantly available. When the computer is shut down, the memory is cleared until the process begins again. Volatile memory can be changed, upgraded, or expanded easily by users.
ROM (Read Only Memory):
ROM stands for non-volatile memory in computers., which means the information is permanently stored on the chip. The memory does not depend on an electric current to save data, instead, data is written to individual cells using binary code. Non-volatile memory is used for parts of the computer that do not change, such as the initial boot-up portion of the software, or the firmware instructions that make your printer run. Turning off the computer does not have any effect on ROM. Non-volatile memory cannot be changed by users.
RAM
ROM
RAM that stands for Random Access Memory is actually a temporary memory while ROM that stands for Read Only Memory is a permanent memory.
RAM stands for Random Access Memory. In this type of memory data is stored for a short duration of time i.e. It is a temporary memory.
ROM stands for Read Only Memory. In this type of memory data is stored for a long duration of time i.e. It is a permanent memory.
Get 5 credit points for each correct answer. The best one gets 25 in all.
